The SANY SSR120-C is a compaction roller designed to have a minimal learning curve and long component life. The simplicity of this machine makes it great for inexperienced road construction equipment operators to train on, offering intuitive controls that make for a natural feel. Powered by a 162 hp Cummins engine and weighing in at 26,455 lbs, the SSR120-C roller gives you the right power and weight you need to reach your density target.
| Model | SSR120C‑8Compaction |
| Engine Model | Cummins QSB4.5 |
| Rated Power | 119 kw 162 hp |
| Model | SSR120C‑8Compaction |
| Overall Length | 5,750 mm 18′ 10″ |
| Height | 3,190 mm 10′ 6″ |
| Overall Width | 2,240 mm 7′ 4″ |
| Operating Weight | 12,000 kg 26,455 lb |
| Weight at Drum | 7,000 kg 15,432 lb |
| Weight at Rear Axle | 5,000 kg 11,023 lb |
| Drum Static Linear Load | 329 N/cm 188 lbs/in |
| Vibration Frequency | 32/36 HZ |
| Nominal Amplitude | 1.8/0.9 mm 0.071/0.035 in |
| Excitation Force | 280/178 kN 61,729/39,242 lbf |
| Drum Diameter | 1,500 mm 59 in |
| Drum Width | 2,130 mm 84 in |
| Drum Edge Thickness | 25 mm 1 in |
| Travel Speed | 0~8.2/0~10.1 km/h 0~5.1/0~6.3 mph |
| Travel Speed with Compactor Engaged | 0~6.2/0~7.3 km/h 0~3.9/0~4.5 mph |
| Gradeability | 51% |
| Ground Clearance | 480 mm 18.9 in |
| Wheelbase | 2,950 mm 116.1 in |
| Steering Angle | ±35° |
| Swing Angle | ±12° |
| Min. Turning Outside Diameter | 11,600 mm 456.7 in |
| Tires | 23.1-26 8PR |
| Model | SSR120C‑8Compaction |
| Fuel Tank | 200 L 52.8 gal |
| Hydraulic Oil Tank | 120 L 31.7 gal |
