The SW405K features a reinforced structural design that’s built to take on the toughest work, including heavy-duty mining operations. It offers an impressive service life reaching 10,000 hours, and boasts SANY-LIVE Telematics to help keep track of performance and service needs. The high-pressure, load sensing hydraulics provide a balance of speed and power while offering 10-15% reductions in energy usage, and the Z-bar linkage design delivers nearly 40,000 lbs of breakout force.
| Model | SW405KWheel |
| Engine Model | Deutz TCD7.8 |
| Max Gross Power | 262 HP |
| Net Engine Power | 252 HP |
| Max Gross Torque | 962 ft lbs |
| Displacement | 7.8 L |
| Model | SW405KWheel |
| Bucket Capacity | 4.2yd3 |
| Breakout Force | 39,683 lbs |
| Tipping Load Straight | 31,967 lbs |
| Tipping Load @ Full Term | 28,881 lbs |
| Clearance (full lift 45º dump) | 10′ 2″ |
| Reach (full lift 45º dump) | 3’10” |
| Model | SW405KWheel |
| Operating Weight | 40,786 lbs |
| Model | SW405KWheel |
| Max Flow | 81 GPM |
| Max Pressure | 3916 PSI |
| Model | SW405KWheel |
| Raise | 5.4 sec |
| Dump | 1.9 sec |
| Float Down | 3.3 sec |
| Total Cycle Time | 10.6 sec |
| Model | SW405KWheel |
| Fuel Tank | 85 gal |
| Cooling Systems | 5.25 gal |
| Engine Crankcase | 6 gal |
| Transmission | 4.7 gal |
| Front Axle | 5 gal |
| Rear Axle | 5 gal |
| Hydraulic Tank | 31 gal |
| DEF Tank | 10.5 gal |
| Model | SW405KWheel |
| Shift Modes | Automatic, Manual, Kick-Down |
| Forward Gear 1-4 | 4-25 mph |
| Reverse Gear 1-4 | 4-16 mph |
| Model | SW405KWheel |
| Front Axle | Fixed |
| Traction Aid | Manual Differential Lock |
| Rear Axle | Oscillating |
| Traction Aid | Open Differential |
| Service Brakes | Wet Disk |
| Parking Brake | Disk Brake |
| Model | SW405KWheel |
| Height to Axle Centerline | 440 mm 17″ |
| Height to Top of Cab | 3527 mm 139″ |
| Center Line of Rear Axle to Edge of Counterweight | 2330 mm 92″ |
| Wheelbase | 3200 mm 10′ 6″ |
| Center Line of Front Axle to Center Pivot | 1600 mm 63″ |
| Shipping Length without Attachments | 6862 mm 22′ 6″ |
| Shipping Length with Bucket | 8142 mm 26′ 8″ |
| Max. Dump Height | 5441 mm 17′ 10″ |
| Hinge Pin Height at Max. Lift | 4133 mm 13′ 6″ |
| Dump Clearance at Max. Lift | 3118 mm 10′ 3″ |
| Dig Depth, Level Bucket | 56 mm 2.2″ |
| Reach at Max. Lift and 45º Discharge | 1140 mm 45″ |
| Roll Back at Max. Lift | 58º |
| Dump Angle at Max. Lift and Dump | 45º |
| Roll Back at Carry Height | 51º |
| Roll Back at Ground | 45º |
| Tail Angle to the Rear Wheel | 27º |
| Clearance Circle to Outside of Tires | 5800 mm 19′ |
| Clearance Circle to Counterweight | 5911 mm 19′ 5″ |
| Max. Circle | 6456 mm 21′ 2″ |
| Width of the Bucket | 3000 mm 9′ 10″ |
| Width | 2200 mm 87″ |
| Articulation Angle | +/- 40º |
