The SANY SW305K wheel loader is the constant workhorse in your fleet. Beyond outstanding durability and reliability, this machine focuses on increased operator comfort for long production days. Your operators will enjoy unobstructed views to the bucket, a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The SW305K’s Z-bar linkage design delivers a robust 27,143 lbs of breakout force. You can rely on this wheel loader’s time-tested components like the Deutz engine, ZF transmission and Kawasaki pumps–offering you an impressive service life over the long haul.
| Model | SW305KWheel |
| Engine Model | Deutz TCD6.1 |
| Max Gross Power | 184 HP |
| Net Engine Power | 167 HP |
| Max Gross Torque | 875 ft lbs |
| Displacement | 6.1 L |
| Model | SW305KWheel |
| Bucket Capacity | 3.0yd3 |
| Breakout Force | 27,143 lbs |
| Tipping Load Straight | 19,621 lbs |
| Tipping Load @ Full Term | 17,007 lbs |
| Clearance (full lift 45º dump) | 8′ 10″ |
| Reach (full lift 45º dump) | 3′ 3″ |
| Model | SW305KWheel |
| Operating Weight | 32,222 lbs |
| Model | SW305KWheel |
| Max Flow | 58 GPM |
| Max Pressure | 3,916 PSI |
| Model | SW305KWheel |
| Raise | 5.2 sec |
| Dump | 1.3 sec |
| Float Down | 3.0 sec |
| Total Cycle Time | 9.5 sec |
| Model | SW305KWheel |
| Fuel Tank | 60 gal |
| Cooling Systems | 8.7 gal |
| Engine Crankcase | 4.1 gal |
| Transmission | 10.6 gal |
| Front Axle | 9.2 gal |
| Rear Axle | 9.2 gal |
| Hydraulic Tank | 34 gal |
| DEF Tank | 2.6 gal |
| Model | SW305KWheel |
| Shift Modes | Automatic, Manual, Kick Down |
| Forward Gear 1-4 | 7 – 40 mph |
| Reverse Gear 1-4 | 7 – 26 mph |
| Model | SW305KWheel |
| Front Axle | Fixed |
| Traction Aid | Manual Differential Lock |
| Rear Axle | Oscillating |
| Traction Aid | Open Differential |
| Service Brakes | Wet Disk |
| Parking Brake | Disk Brake |
| Model | SW305KWheel |
| Height to Axle Centerline | 695 mm 2′ 3″ |
| Height to Top of Cab | 3405 mm 11′ 2″ |
| Center Line of Rear Axle to Edge of Counterweight | 1911 mm 6′ 3″ |
| Wheelbase | 3000 mm 9′ 10″ |
| Center Line of Front Axle to Center Pivot | 1480 mm 4′ 10″ |
| Shipping Length without Attachments | 6226 mm 20′ 5″ |
| Shipping Length with Bucket | 7511 mm 24′ 8″ |
| Max. Dump Height | 5214 mm 17′ 1″ |
| Hinge Pin Height at Max. Lift | 3845 mm 12′ 7″ |
| Dump Clearance at Max. Lift | 2689 mm 8′ 10″ |
| Dig Depth, Level Bucket | 122 mm 4.8″ |
| Reach at Max. Lift and 45º Discharge | 993 mm 39″ |
| Roll Back at Max. Lift | 61º |
| Dump Angle at Max. Lift and Dump | 45º |
| Roll Back at Carry Height | 49º |
| Roll Back at Ground | 42º |
| Tail Angle to the Rear Wheel | 28º |
| Clearance Circle to Outside of Tires | 5382 mm 17′ 8″ |
| Clearance Circle to Counterweight | 5365 mm 17′ 7″ |
| Max. Circle | 5969 mm 19′ 7″ |
| Width of the Bucket | 2545 mm 8′ 4″ |
| Width | 2045mm 6′ 8″ |
| Articulation Angle | +/- 40º |
